Konmax Cold Drink Dispenser Description:
1.The machine can make hot and cold milk, fruit juice and other hot
and cold drinks, easy to use, clean and it is an ideal equipment
for the catering industry.
2.This machine adopts stainless steel evaporator, heat transfer
effect is good or cool down fast. 3.This machine has small size,
light weight, low power consumption, easy operation and so on.
4.Food-grade high-density crack PC capacity tank, safe, easy to
clean
5.Split out the material switches to ensure that pollution-free
frozen drinks.
6.Humanized design, computer control panel, 304 # stainless steel
shell, beautiful and durable
7.Spray-type design, application and strong bond, particle big
drinks, such as soy milk, pearl milk tea and so on.
8.Power, voltage, frequency is up to the customer's requirements.
9.Wrap-around stainless steel evaporator, cooling the strong rapid
temperature equilibrium.
10.Closed-end high back pressure compressors, energy-saving quiet,
noise less than 55db
11.Using R134A refrigerant, anaerobic environment
Konmax Cold Drink Dispenser Application:
Hotel ,restaurant,store , supermarket,drink bar etc
Konmax Cold Drink Dispenser Specification:
| Material | Stainless steel R304 | Machine size | 480*460*740MM |
| power | 280/600W | Packing size | 510*470*750MM |
| Cold-beverage temperture | 7 to 12 degree | Hot-beverage temperature | 52 to 58 degree |
| Tank material | PC | Model | LSJ 18 LX2 |
| Condenser | with Copper tube | Certificate | CE |
| switch | LCD switch | Packing Way | Carton +foam inside |
| Electrics Standard | 110V-220V,50-60HZ | Drive Mode | Magnetic rotating |
| G.W | 31KG | N.W | 29KG |
| 40' HQ loading | 425PCS | FOB Shanghai | USD |
| 20' FT loading | 165PCS | Warranty | 1 Year |
Konmax Cold Drink Dispenser Konmax Cold Drink Dispenser Detailed Photo:
Cold drink dispenser machine can be cold , and cold& hot function .
Also Mixing and spraying depend on your requirement .
Cold-beverage temperture 7-12℃
Hot-beverage temprture 52-58℃
Strong fan make good air vents allow circulation of air around the
condenser, improving cooling efficiency and protecting the machine
for long periods of use
Protective film to make sure the machine in good condition , when
you use it please tear off the film .
Konmax Cold Drink Dispenser Factory show:
Konmax Cold Drink Dispenser Installing Methods:
1: To install it ,pls choose the site which is flat,fixable and can
avoid the direct sunshine in sunmmer.
2:Around the juicer, should have 150mm up room to make the air
circulating and make sure the machine can run effectively.
3:Before installing, pls check the supply whether confirm the
requirements or not. The power supply cable is not too thin or too
long. The cross section of cable should be 1.5-2.5mm, Voltage is
mounted on the fixed position with fuse which will keep the users
safety,it must have reriable grounding. The socket should be
mounted on the fixed position with fuse which keep the machine
running safety.
4;To make the fix position for juicer,should make its frond lower
and back higher(to ajust the foot of
bottom can do it), then the water in the salver can flow into the
box through the hose.
For Youtube Link about cold drink dispenser opeation please check :
